Sws outside extra | window connection foil | 150x30mm - 145968

SWS Outside Extra is an airtight, vapour-permeable, and driving rain-proof window connection foil for exterior use, featuring a strong self-adhesive strip for attachment to the window frame and a powerful full-surface self-adhesive layer for attachment to the rough construction. It can be directly plastered over or finished with an exterior insulation finishing system (ETICS). It is part of the SOUDAL WINDOW SYSTEM. Special Features: Airtight, Driving rain-proof, Vapour-permeable, Full-surface self-adhesive for attachment to the rough construction (pressure-sensitive), Self-adhesive strip for attachment to the window profile (pressure-sensitive), Flexible, UV-resistant, Plasterable and paintable, 2- or 3-part release liner (depending on width), Tear-resistant, Good temperature resistance, Can be applied cold (no additional adhesive needed), No drying time, immediate further work, Easy installation, easily pliable in corners, Complies with the requirements of DIN4108 (EnEv) and the recommendations of RAL installation, Part of SWS (Soudal Window System). Application: SWS Outside Extra window tapes ensure an airtight, driving rain-proof, and vapour-permeable connection of the window frame to the surrounding load-bearing structure. This flexible membrane can also be used as an airtight and driving rain-proof seal for all types of wall connections. For exterior use only. Instructions for Use: SWS Outside Extra may only be applied to the exterior. Depending on the situation, the installation of SWS Outside Extra can be carried out before or after the installation of the facade element (e.g., window frame). There are 2 methods for applying SWS Outside Extra. You can work with a single continuous strip or with 4 separate strips. In both cases, extra material must be provided for the corners (approx. 5 to 10 cm per corner). After unrolling and removing the release liner, adhere the foil, using the exposed adhesive strip (on the printed side), to the side of the facade element, or remove the release liner from the adhesive strip on the unprinted side and adhere the foil to the front of the facade element. Always ensure that the text is readable and facing outwards. Evenly remove the remaining release liner. Adhere the foil, not too tightly, to the rough construction to accommodate any movements between the different building elements, but avoid folds. The adhesive layer of the foil is pressure-sensitive; the more firmly it is pressed, the better the adhesion. Use a pressure roller for this.